<< Click to Display Table of Contents >> Navigation:  Data Entry > Borings and Wells > Editing a boring or well log > Graph Data

Graph and bargraph data can be used to display numerical information that varies with depth; such as shear strength, water content, hydraulic conductivity, contaminant concentrations, volatile hydrocarbon readings, etc. Depending on the template if the column is displayed as a graph or bargraph, a tab for the data will be added.The tab name will be the same as the graph name in the template.

 

At the top of tab there are buttons to Add or Delete graph data.

 

If the graph type is not a bargraph the following information can be edited for each data point:

 

Depth: This is the depth to display the data.

 

Data: This is the numerical data for the graph at the specified depth.

 

Label: This is an optional text label to display at the specified depth.

 

If the graph type is a bargraph the following can be edited for each data point:

 

Top Depth: This is the top depth to display the data.

 

Bottom Depth: This is the bottom depth to display the data.

 

Data: This is the numerical data for the graph at the specified depths.