<< Click to Display Table of Contents >> Navigation:  Chapter 4 Projects > Project Templates > Editing a Project Template > Editing Data Elements > Tables > Filters Tab

 

This tab is used to specify filters for the data to be shown in the table. Multiple filters can be added or removed using the Add and Remove buttons. Filters can be created by specifying the following and then clicking the Add button.

 

Data Field: This is used to select the data field for the filter. The types of data fields will depend on the table type.

 

Condition: This is used to select the filter condition; such as, greater then, less then, equals, etc. The types of conditions will depend on the data field selected.

 

Greater than: This is used to specify the value or date that the data must be greater than.

 

Less than:This is used to specify the value or date that the data must be less than.

 

Equals: This is used to specify the value or date that the data must equal.

 

Starting with: This is used to specify the value or text that the data must start with.

 

 

In addition to filters, the following can be specified depending on the type of table.

 

Results to Include: If the table type is Geotechnical Tests or Lab Analyses, this is used to select whether to filter and display all of the results or only the results for the samples tested.

 

Test Age: If the table type is Geotechnical Tests and the media type is Concrete, this is used to select the test age for the samples.