<< Click to Display Table of Contents >> Navigation:  Chapter 6 Lab Analyses > Editing a Lab Analysis > Information Tab

The Information tab is used to specify the general information for the lab analysis.

 

 

The following information can be specified on this tab:

 

Parameters: This is a group or parameters or individual parameter to be analysed.

 

'Matrix: This is used to select the matrix of the sample. It can be either water, soil, rock, fluid, or solid.

 

Lab Reference ID: This is the reference ID for the lab analysis used by the analytical laboratory.

 

Sequence #: Sequence numbers are used when more than one lab analysis is done on a sample.

 

COC #: This is the chain of custody number for the sample.

 

Container: This is used to specify the type of container used for the sample. The Lookup Container button can be used to lookup the recommended container, container size, and preservative for the parameter group to  be analysed. As described in the Lookup Containersection below.

 

Container Size: This is the size and size units of the container used for the sample.

 

Preservative: This is the preservative used for the sample.

 

Arrival Temperature: This is used to specify the arrival temperature of the sample when it arrived at the lab.

 

Laboratory: This is used to select the laboratory that conducted the analysis.